logo cart

OBD2 Scan Tools
GM OBD1 Cables
MEFI Scan & Tune
MEFI Scan 1-4
MEFI 5 Tune
MEFI 5/6 Scan
555 Scan
Slingshot Scan
Slingshot Tune
Marine ECMs
Merc 555 ECMs
ECM Repair
Ramjet Tuning
Custom MEFI Tuning
Vehicle Connectors
J1939 Solutions
Extender Cables
arrowY Adapters
arrowJ1939 Adapters
arrowRP1226 Adapters
arrowOBD2 Adapters
arrowCAT Adapters
arrowJ1708 Adapters
arrowMarine Adapters
arrowOther Adapters
Custom Cables

arrowShipping Info
arrowDiagnostic Software
arrowInstruction Sheets
arrowHow To Use Video
arrowELM327 Data Sheet
arrowWarranty / Returns
arrowContact Us
arrowOBD2 Links & Info
arrowInternet Forums
arrowOur Competitors
arrowBeyond Scanning
arrowParts & Accessories



OBD Diagnostic Connector Adapters

Below are some of the standard adapters we offer.

Don't see what you need? Check out our Custom Cables page or give us a call at 310-793-2410. We can custom make nearly any configuration to your specifications.

J1939 Male to OBD2 Male
This adapter cable allows a J1939 Scan Tool (a scanner designed to plug into the round J1939 9-pin Deutch connector on a vehicle) to be used with a J1939 equipped vehicle that uses a standard OBD2 style connector.
J1939 Female to OBD2 Female
This adapter mates with a J1939 vehicle and allows an OBD2 style tester connection to fit. The J1939 +/- data lines are connected to the CAN +/- lines, and the power and ground lines are also connected. The most common application is to connect a GPS Tracker that is meant for an OBD2 vehicle to a vehicle that has the 9-pin round Deutsch connector.
J1708 F to OBD2 F
This adapter allows a GPS tracker designed for an OBD2 connector to connect to vehicle with a round 6-pin J1708 connector.
OBD2 Y Adapter
Connect 2 OBD2 devices to your OBD2 Diagnostic port.
Volvo M-M Adapter
Beginning in 2013, Volvo has a new OBD2 Style diagnostic connector for a Volvo chassis with a Volvo engine. This adapter allows the use of a standard J1939 tester to connect to the new connector style.
GMC Top Kick M-M Adapter
The GMC Top Kick with the Cummins engine uses an OBD2 style connector for diagnostics, but uses J1708 data. The Top Kick with the CAT engine uses J1939 Data. This adapter allows a J1939/J1708 tester with the standard J1939 9-pin connecter to hook to the Top Kick.
Hino Truck M-M Adapter
This adapter allows a J1939 tester with the standard J1939 9-pin connecter to hook to the Hino with the OBD2 style connector.
Allison to J1939 Adapter
Allison (and some Detroit Diesel) vehicles using the 16-pin OBD2 style diagnostic connector use pin 4 for Ground instead of pin 5. This adapter allows a standard J1939 accessory (GPS unit, tester, etc) using the 9-pin plug to connect to the Allison diagnostic port.
GM ALDL OBD2 97-71138
GM Adapter for ALDL testing.
OBD2 to Marine 6-pin Adapter
Allows an OBD2 style device to connect with a 6-pin marine connector.

Call Toll Free (USA Only) 888-469-3274

OBD2 | GM OBD1 | Marine ECMs | MEFIburn | J1939 | Ramjet

OBD Diagnostics, Inc., Redondo Beach, CA 90278
Tel: 310-793-2410     Email: sales@obd2allinone.com
Terms and Conditions     Privacy Policy