 |
 |
|
|
 |
OBD2 All-In-One Scan Tool w/ USB
There is no longer a supply of new ELM327 chips. ELM327 compatible scan tools on the market are using knock-offs or clones of the original ELM327 chip, which may or may not be fully ELM327 compatible. We have a very limited supply of original ELM327 chips of prior versions, that are available below. When they're gone, they're gone!
The ELM 327 based OBD2 All-In-OneTM scan tool will work with 1996 and later vehicles with any of the OBD-II protocols:
There are 5 diagnostic LEDs on the OBD2 All-In-OneTM scan tool that let you see at a glance what is going on with the communications: The entire OBD2 All-In-OneTM unit is small (1 3/4" x 3 3/4" x 3/4") and sturdy. It can easily be tossed in your toolbox with your other diagnostic tools. It is made in the USA. The OBD2 All-In-OneTM scan tool can be plugged directly into the USB port on the back of your PC or laptop computer, or if you require more distance between the OBD2 port on your vehicle and the computer than the 5 ft OBDII cable and the 3 ft included USB cable provides, purchase a 6-foot or 10-foot, USB cable from us. What You Get The photo below shows the hardware in the package you will receive from us, which includes everything you need to hook up and run the tool:
|
 |
|
OBD Diagnostics, Inc., Redondo Beach, CA 90278
Tel: 310-793-2410 Email: sales@obd2allinone.com
Terms and Conditions Privacy Policy