The Green connector is available with a locking ring and without a locking ring. Rotating the locking ring when connected assures that the connector cannot come unplugged accidentally. The connector without the lock ring is pressure fitted and is more suited for a test or diagnostic environment where the connector is plugged and unplugged regularly. All of our Type 2 cables can be special ordered with the non-locking connector for an additional cost and lengthened delivery time. Contact us at sales@mefiburn.com for more information.

The Green Male connector comes standard with a mounting flange that accepts 4 screws (pictured on the right). It is also available is a version that mounts with a Jam Nut (pictured on the left)

Item#	Weight	Price	Qty
J1939 Type 2 Locking to Type 1/2 Y Cable
J1939T12Y	0.37 lbs	$61.00 ea
J1939 Type 2 Locking to Type 1/2 Jam Nut Y Cable
J1939T12YJN	0.37 lbs	$61.00 ea

Y cable for J1939 Type 2 systems. This cable includes one Type 2 Female (sockets) connector to plug into your vehicle connected to one Type 2 Male (pins) bulkhead connector and one Type 1 Male (pins) bulkhead connector. This allows you to plug one Type 1 accessory and one Type 2 accessory into one vehicle bulkhead connector.

The 9 contacts are wired as follows:

Signal Name	Type 2 F	Type 2 M	Type 1 M
Ground	A	A	A
Battery	B	B	B
J1939 Type 2 High	C	C	C
J1939 Type 2 Low	D	D	D
J1939 Shield	E	E	E
J1939 Type 1 / J1708 High	F	F	-
J1939 Type 1 / J1708 Low	G	G	-
OEM Specified	H	H	-
OEM Specified	J	J	-

J1939 Type 2 F/G to Type 1/2 Y Cable

Item#	Weight	Price	Qty
J1939 Type 2 Locking to Type 1FG/2 Y Cable
J1939T1FG2Y	0.37 lbs	$61.00 ea
J1939 Type 2 Locking to Type 1FG/2 Jam Nut Y Cable
J1939T1FG2YJN	0.37 lbs	$61.00 ea

Y cable for J1939 Type 2 systems. This cable includes one Type 2 Female (sockets) connector to plug into your vehicle connected to one Type 2 Male (pins) bulkhead connector and one Type 1 Male (pins) bulkhead connector. This allows you to plug one Type 1 accessory and one Type 2 accessory into one vehicle bulkhead connector. The Type 1 connector is wired to the secondary J1939 system on the Type 2 Connector.

The 9 contacts are wired as follows:

Signal Name	Type 2 F	Type 2 M	Type 1 M
Ground	A	A	A
Battery	B	B	B
J1939 Type 2 High	C	C	-
J1939 Type 2 Low	D	D	-
J1939 Shield	E	E	E
J1939 Type 1 / J1708 High	F	F	C
J1939 Type 1 / J1708 Low	G	G	D
OEM Specified	H	H	-
OEM Specified	J	J	-

Don't see what you need? Check out our Custom Cables page or give us a call at 310-793-2410. We can custom make nearly any configuration to your specifications.