|
J1939 Type 2 (Green) Female to OBD2 Female Adapter
Starting in 2016 All heavy equipment vehicles are equipped with the new high speed J1939 Type 2 system. This system
has Green colored connectors instead of the standard black Type 1. A type 1 connector cannot plug into a type 2, but the
type 2 can plug into both.
The Green connector is available with a locking ring and without a locking ring. Rotating the locking ring when connected assures that the connector cannot
come unplugged accidentally. The connector without the lock ring is pressure fitted and is more suited for a test or diagnostic environment where the
connector is plugged and unplugged regularly. All of our Type 2 cables can be special ordered with the non-locking connector for an additional cost and
lengthened delivery time. Contact us at sales@mefiburn.com for more information.
J1939 Type 1 and Type 2 Pin Designations
Many pieces of test equipment or GPS units are capable of handling the high data rates in a type 2 system. This
adapter will allow these units to attach to a type 2 system.
Wiring Connections
Some vehicles will have older (250k data) on pins F and G with the newer Type 2 connector. This adapter will
connect the older data from pins F and G of the Type 2 connector to the CAN lines of the OBD2 connector.
This will allow your existing systems to be used on the new vehicles. Check with your vehicle manufacturer to see if
the 250k J1939 data is supplied on pins F and G.
Wiring Connections
Don't see what you need? Check out our Custom Cables page or give us a call at 310-793-2410. We can custom make nearly any configuration
to your specifications.
|
|