logo cart


 
Products:
OBD2 Scan Tools
GM OBD1 Cables
MEFI Scan & Tune
MEFI Scan 1-4
MEFI 5 Tune
MEFI 5/6 Scan
555 Scan
Slingshot Scan
Slingshot Tune
Marine ECMs
Merc 555 ECMs
ECM Repair
Ramjet Tuning
Custom MEFI Tuning
Vehicle Connectors
arrowAccel Pedal
arrowAlternator
arrowAmbient Air Temp
arrowCamshaft Position
arrowCrankshaft Sensor
arrowCoil Driver
arrowCoolant Temp
arrowDiagnostic Port
arrowDistributor
arrowECM Connectors
arrowEVAP Canister
arrowFan Control
arrowFuel Injectors
arrowFuel Level
arrowFuel Pump
arrowFuel Tank Pressure
arrowFuses
arrowIdle Air Control
arrowIgnition Coil
arrowIntake Air Temp
arrowKnock Sensor
arrowMAP
arrowMass Air Flow
arrowOil Pressure
arrowOil Temperature
arrowOxygen Sensors
arrowTachometer
arrowThrottle Body
arrowThrottle Position
arrowTransmission Fluid
arrowVehicle Speed
arrowWheel Speed
J1939 Solutions
InjecTimer
Extender Cables
Adapters
Custom Cables
logbottom

logtop
arrowShipping Info
arrowDiagnostic Software
arrowInstruction Sheets
arrowHow To Use Video
arrowELM327 Data Sheet
arrowWarranty / Returns
arrowContact Us
arrowOBD2 Links & Info
arrowInternet Forums
arrowOur Competitors
arrowBeyond Scanning
arrowParts & Accessories
arrowTestimonials
logbottom

visa
mc
amex
paypal

spacer ECM Connectors

MEFI1 to MEFI 4

The MEFI 1-4 family of controllers all use the same ECM connectors for J1 and J2, even though the style of the ECM package is different for the MEFI1 and MEFI2 vs the MEFI3 and MEFI4. The connectors look similar, and are the same except for a keying part which assures that the connectors are not plugged into the wring place on the controller.

The diagrams below show the J1 and J2 designaltion for the two types of MEFI packaging. On the controller itelf, the connector locations are labelled by some raised lettering on the body of the connector, but we have illistrated these clearly below.

Both connector sets come with all the pomponents needed to assemble the connecotr, including crimp sockets and hole plugs. Additional sockets and hole plugs are available for order.

J1
service engine soon
ALDL
J2
service engine soon
ALDL


MEFI5 ,MEFI6, and E76

The MEFI5,6 and E67 controllers from GM all have the same connector layout. There are three connectors on the face of the controller. The connector names are embossed into the metal housing of the controller but the diagram below shows clearly which connector is which.
  • J1 - This is the smallest of the three connectors and has 56 pin locations. The body of the connector housing is blue in color
  • J2 - This is a larger connecotr with 73 pin locations and is black in color. 72 of the pins are the small style, and one of the pins is a larger ground connector that uses a special socket made by Yakagi
  • J3 - This connector is much like J2 except the body of the connector is gray in color and has a different keying than the J2 connector, peventing the two from being inadvertantly swapped.

The connectors come as a complete kit including 16 crimp sockets and in the case of J2 and J3 a Yakagi crimp socket. Additional crimp sockets and Yakagi sockets are available for order.

J1

J2

J3


ECM555 / PCM555

The Motorola family of engine controllers comes in two configurations, one with a pair of 24 pin connectors and one with a pair of 24 pin connectors plus a 32 pin connector (pictured below). The two 24-pin connectors on the ECM 555 are the same keying as the two 24-pin connectors on the PCM 555.

The crimp sockets are available in bags of 10 sockets each, and do not come with the cpnnector shell, so when ordering, be sure to add in the crimp sockets as well.

A

B

C

blueline
Call Toll Free (USA Only) 888-469-3274

OBD2 | GM OBD1 | Marine ECMs | MEFIburn | J1939 | Ramjet


OBD Diagnostics, Inc., Redondo Beach, CA 90278
Tel: 310-793-2410     Email: sales@obd2allinone.com
Terms and Conditions     Privacy Policy